Stand Up Comedian Or Bubble Blower?

Stand Up Comedian Or Bubble Blower?

 by: Matt Canham

He explained in great detail the embarrassment of holding on to the edge of the pool blowing bubbles, practising the breathing technique before graduating to a kick board and doing laps up and down the pool.


continued effort, he managed to teach himself to complete a lap of freestyle and now here he is – 5 months later – swimming 1 mile each day.

He isn’t going to be trialling for the Olympic team anytime soon, but he has become proficient at it after a relatively short while.

So too, does it go with learning stand up comedy. It might feel like blowing bubbles at times and can you either sink or swim up on stage, but it is a skill you can learn and like any other, you can get so good at it, it can become a way to make money.

The bubble blowing of stand up comedy.

I think one of the most important initial steps should be to watch comedians who are already established. Live performances are best, or DVDs of live performances, where you can see the performer in their element doing what they do best.

When you are ready to practise breathing techniques, watch each comedian and make a note of how they construct their jokes. Take note of their delivery, their timing. Is the punchline obvious? Try to think about why you find a joke funny. Even better, observe the way they react when a joke receives only a mild reaction.

As for the whole issue of copying, here is where I stand. If you directly take the words of another person and deliver them yourself, that is stealing material. However, if you take a concept and improve on it, then that is fair game. A lot of people have made millions by improving inventions by only 10%, why shouldn’t a student of comedy have the same opportunity?

There is also the issue of delivery. Just because something bombs for one comic, doesn’t mean it will be the same for the next guy. In most cases, the failure is the result of the actual performer, not the show and in fact, once you have a routine and some jokes, your work should be on improving the performer.

The first step is to be honest with yourself. If you are cynical and full of hatred, that’s ok, that’s who you are. Similarly, if you have the most positive outlook on life, then that should set the tone for your act. Audiences will relate to people who are honest and comfortable in their own skin. Audiences aren’t dumb. They can sense people who attempt to put on or try to form an image. If it’s incongruent with your body language, your mannerisms and your vibe, you will be blown out and bomb.

The next step after blowing bubbles is to graduate to the kick board – the actual jokes or material you will be performing. For comedy to be effective, it has to be congruent with who you are – we already know this. So too, do the subject matter for your comedy. It has to be personal and about things that are interesting or important to you. A big part of what makes it funny, is the enthusiasm towards the subject from the comic. It should be something you are at least passionate about so people watching will think, this guy knows a lot about this.

How effective would Tim Allen have been if he didn’t like cars and power tools?

The best way to go about the material gathering phase is to write down your interests, your hobbies and then all the things about those that you like, dislike and amuse you. Chances are if they amuse you, they will also amuse others.

Once you have material, you are ready to start swimming. At first, it will feel weird, your timing will be off and you’ll most likely get water up your nose. Don’t worry – it’s all part of the process. It will take some time to work out how your jokes, your personality and your timing fit in with each other. The important thing is to practice. At home, at work, at the bus stop, practise on anyone that will listen. Test single jokes, test openers, test it all.

Only when you are the stage where you can put a few laps together, should you think about performing. Remember, you have to get over your fear of the water, learn how to blow bubbles and use the kick board before you can swim.

Copyright 2006!AnG6U1J2D-yzaylcmXc7c8XOA2w Matt Canham

This article was posted on February 27, 2006

<< Back to “Recreation And Sports” Index


Actress Monica Potter Renovates Her Childhood Home in New HGTV Series ‘Welcome Back Potter’

NEW YORK–(BUSINESS WIRE)–Actress, entrepreneur and mother, Monica Potter, best known for her role

in NBC-TV’s Parenthood, returns gifts for people who live on the lake to Cleveland to renovate her

childhood home near the shore of Lake Erie in HGTV’s new series Welcome

Back Potter. Premiering on Tuesday, October 11, at 11 p.m. and

11:30 p.m. ET/PT, the series follows Monica, her mom, Nancy, and three

outspoken sisters, Jessica, Brigette and Kerry, as they tackle the

massive whole-home renovation.

The family sold the home in 1987, but it sat abandoned and in disrepair

for the last five years. For Monica, restoring the 1,800 square-foot

family home that was built in 1924 is something that she and her family

can work on together. “I always wanted to buy the house back,” said

Monica. “After 30 years, it’s finally back in the family.”

In the series premiere, Monica, her sisters and mother walk through the

home to discover little has changed since they left–everything from the

rickety front steps, old wallpaper, furniture and even childhood

mementos–were still there. But the family is eager to renovate the home

and make it a place they can gather for special occasions and holidays.

With help from a construction team, the sisters demolish walls and tear

out the old cabinets and appliances to gift ideas for boaters create an open-concept kitchen

and dining area. With décor items from Monica’s local shop, Monica

Potter Home, fresh paint, new cabinetry, and a custom-made lighting

feature created by Monica and her youngest sister Kerry, the combined

rooms are transformed into a beautiful, airy and inviting space.

“This home was a magical place to grow up,” said Monica. “It’s the heart

of my family.”


America’s leading home and lifestyle brand, HGTV features a top-rated

cable network that is distributed to more than 96 million U.S.

households and,

the premier source for home-related inspiration, instruction and

entertainment, attracts more than six million people each month. The

brand also includes the HGTV HOME(TM) consumer products line which

showcases exclusive collections of paint, flooring, furniture, plants,

fabrics and other home-oriented products. For more information on HGTV

HOME branded products and to find a retailer, go to

In partnership with Hearst Magazines, the HGTV Magazine, a home and

lifestyle gifts for nautical lovers publication, is currently available on newsstands. Viewers can

become fans of HGTV and interact with other home improvement enthusiasts

through Facebook,



and Instagram.

Headquartered in Knoxville, Tenn., HGTV is owned by Scripps Networks

Interactive, Inc. (SNI).

How can chiropractors benefit your health?

Back and neck pain are the chief complaints for which patients seek chiropractic help. Through manual spinal manipulation, chiropractic care is a holistic therapy that focuses on maintaining healthy musculoskeletal and nervous systems to ensure overall wellness.


The research about chiropractic care is growing. According to the Annals of Internal Medicine, recent studies show that spinal manipulative therapy performed by a chiropractor, along with exercise, relieve neck pain more effectively than medication.

Furthermore, the Journal of Manipulative and Physiological Therapeutics reported that an integrated approach to health care — including chiropractic care — results in a 51.8 percent reduction in pharmaceutical costs and 43 percent fewer hospital admissions.

You should consider seeing a chiropractor if you experience frequent pain in your back, neck or joints, as well as headaches. This is especially so if intense soreness follows accidents, household chores or prolonged periods of poor posture.

Back and neck pain

Chiropractors are best known for safely and effectively treating acute back and neck pain, as well as headaches. Whereas a medical doctor might prescribe pain medicine, muscle relaxers or anti-inflammatory drugs, and an orthopedic doctor might suggest surgery, a chiropractor will treat your back problems by hand, through manipulation of the spine.

Nancy Elwartowski-Cooper, a pediatric and prenatal chiropractor, sees more and more referrals from medical doctors: “They (patients) are tired of the drugs and want answers to what is causing their problems.”

Chiropractors bring the musculoskeletal structure into proper alignment. Chiropractors change the position of your body and apply Chiropractor pressure to particular points along the spine that are vertebral subluxation not properly aligned. This results in a popping noise similar to the one created when you crack your knuckles. noise is Back Pain created by a change in pressure in your joints as gas bubbles are released.

By adjusting the spine with their hands at particular pressure points, chiropractors unblock nerve energy and allow it to flow better down your spin and throughout your entire body. Repeated visits can, over time, realign your spine to optimize overall health.

Chiropractor Brian Elwartowski said the brain sends messages down the spinal cord and out through the nerves to the rest of your body. If certain nerves are squeezed by a twist in the spine, they won’t function as well as if they were straight. “Chiropractic [care] allows the nerves to work at their most optimum ability,” he said, “allowing the body to heal at its optimum ability.”

How To Get Rid Of Ovarian Cysts Naturally And Fast

If you have been diagnosed with ovarian cysts, you may well be in great pain for part of the month. Conventional medication, which usually includes the birth control pill and over the counter painkillers may help relieve some of the pain, but will not help to eliminate the cysts as neither will treat the root cause.

If you would like to know how to get rid of ovarian cysts naturally, there are a number of steps you can take. We all know that in general, natural remedies tend to be better for the body as there can be concern about the long-term use of certain drugs, the birth control pill being one of them.

One very simple starting point is to look at what you eat. Eating or drinking foods which have natural diuretic qualities can help to naturally reduce the amount of fluid which is in the body and this has a direct effect on the amount which will be contained in your cysts. Parsley is a great natural diuretic and can be included in soups, salads and sandwiches.

Estrogen and carbohydrates are implicated in ovarian cyst growth and if you are looking at how to get rid of ovarian cysts naturally then reducing consumption of both of these will help. High carbohydrate consumption can lead to weight gain, which in turn leads to estrogen build-up in the fat cells. This then promotes the formation of ovarian cysts which do not dissolve as they should. You may also wish to cut down on your consumption of non-organic meats as some of the feeds can contain estrogen mimicking compounds.

Drinking plenty of fluid is also thought to be very helpful. You should drink a minimum of 2 liters of filtered water daily to ensure that the vital organs remain hydrated. It is well known that if allowed to dehydrate, the body’s organs become diseased.

Eating a low-fat diet which is rich in fresh fruits and vegetables will help to get rid of ovarian cysts, but you should also ensure that other areas of your life remain under control, such as your stress-levels. Also, including 30 minutes of brisk exercise can help to get the blood circulating around your vital organs which can prevent congestion.

There is a guaranteed system which will teach you how to get rid of ovarian cysts naturally. “

The unique feature of this excellent system is the personal support given by the devoted creator of the system, herself a former sufferer, who is totally committed to helping as many women as possible be free from this condition.

By: Charlotte Oliver

Article Directory:

Please Chiropractic visit Ovarian Cysts Remedies for further information.

What is a Powered Parachute (PPC)?

Human beings have always wanted to free themselves from the shackles of gravity and fly like birds. This is what has led mankind to construct a dizzying array of flying machines – from helicopters, to airplanes, to rockets. But for people who want to really experience what it feels like to be a bird, these flying machines fall far short. Helicopters and airplanes simply do not provide the sheer thrill of soaring over hills and treetops, like a bird on the wing. It was to fulfill this desire that gave rise to the creation of powered parachutes.


Basically, this parachute is a combination of a motorized, gliding, flying wing and a parachute. When it was first invented in the early part of the 1980s, it was a crude contraption; however, today it is considered the ultimate in personal flying machines. Much of its popularity is due to it being one of the cheapest-powered flying machines available. Apart from being affordable, its size is such that when it is not in use, it can easily be stored in the garage.

Advantages and Disadvantages of Laser Cutting

. Laser cutting entails the use of a laser beam to cut products like timber, plastic, metal, rubber, and so on. This innovation has actually ended up being a fundamental part of a manufacturing process. This technique comes with its very own share of advantages and also downsides.

. Advertisement


. Laser Reducing Material cutting is one of the significant steps associated with a manufacturing procedure. This action should be performed properly and also effectively to make sure that the succeeding steps of the manufacturing process can be carried out appropriately.

Existing manufacturing systems make use of lasers to execute this task.Laser cutting equipments are integrated with a computer-controlled programming system which determines where and just how the cut needs to be made on the product. Despite the fact that laser beams have terrific energy, they also have some limitations.Advantages of Laser Reducing|Holding the work-piece in ideal placement is easier in case of laser reducing as compared with mechanical cutting.|Cuts gotten with the laser are extremely precise and do not

call for a great deal of time. Instead, the whole process of cutting the product is rather very easy as well as achieved in much less time compared to that needed by conventional cutting makers.|As the cut is made by the help of a laser beam, there is no direct contact of the work-piece with any cutting instrument, therefore removing the risk of material contamination.|In standard processes the warmth produced while cutting normally turns the material out of form.

In laser cutting, as the town based on warm is extremely small, it decreases the opportunities of warping of the product.|Laser cutting devices make use of less power for cutting steel sheets as contrasted to plasma cutting modern technology

.|Laser cutting technology could be made use of to reduce a number of products like ceramic, wood, rubber, plastic

, as well as specific metals.|Laser cutting is incredibly functional as well as could be used to reduce or inscribe basic to complicated layouts on a workpiece.

|Manufacturing units with room restrictions profit a whole lot by setting up laser cutting devices since a couple of laser cutters can doing the job of numerous other devices used for cutting.|Laser cutting is managed by the assistance of computer programs, consequently saving significant amount of workforce.|As the laser reducing maker does not call for human involvement besides repair services and also trial run, the incidence of mishaps and injuries is additionally reduced.

|Efficiency of the maker is very high, and reproductions gotten of the required layout are exact duplicates of each other.Disadvantages of Laser Cutting|Usually, laser reducing involves high power intake in contrast with other technologies utilized for cutting. Usage of power and efficiency depends on the kind of laser utilized for cutting and the kind of cut that needs to be made.|Reducing plastic with the help of these makers may cost a great deal of cash since plastic emits fumes when based on warmth. As a result of this, the whole arrangement has to be made in a well-ventilated room which can be quite costly.

Additionally, fumes released during the process can be hazardous and also could confirm to be deadly.|Rate of production is not constant when laser cutting is utilized. It extremely relies on density of the work-piece, kind of material, as well as type of laser made use of.|Carelessness in adjusting laser distance as well as temperature level might bring about burning of some materials. Specific metals have the tendency to blemish if the strength of the laser light beam is not according to requirement.|Human participation is just required in case of trial run and also

repairs. Throughout these tasks, if inadvertently, a worker is available in call with the laser beam, he may experience significant burns.Conventional reducing methods are also great and low-cost, but regardless of the drawbacks connected with laser cutting

process, using this modern technology has actually acquired a whole lot of appeal. This is because the quality of coating gotten after laser reducing a product is much much better compared to that acquired by other approaches.

. . . . . Priyanka Kosta Sonkushre . . . Last Upgraded: April 7, 2016 . . . . . . .

Blue Danube Systems Launches First Commercial Product Using High Definition Active Antenna Systems™ Technology

MOUNTAIN VIEW, Calif.–(BUSINESS WIRE)–Blue Danube Systems, a provider of cost-effective wireless access solutions that significantly increase mobile network capacity and enhance River of Life TC quality of service, today announced the launch of River of Life its first commercial product, BeamCraft 500, using the companys proprietary High Definition Active Antenna Systems (HDAAS) technology.

HDAAS is a new radio platform, specifically developed for advanced 3D beamforming in 4G, 5G and other wireless applications. The HDAAS platform places and directs wireless power to solve the challenges of ever-increasing data demand. By intelligently and seamlessly focusing radiated power where it is needed most, HDAAS allows wireless carriers to better serve high-demand areas and minimize interference zones while delivering up to a 10X increase in cell capacity.

Built upon the HDAAS platform, Blue Danubes BeamCraft product series can deliver a range of performance improvements and support multiple field applications through design elements such as transmit power, array size and intelligent software control. The companys first River of Life product, the BeamCraft 500, packs 96 active elements and radios with a total maximum output power of 160W into a panel measuring 63 inches x 14 inches x 10 inches (HxWxD). This panel can be easily installed at existing antenna locations, onto both towers and buildings, using conventional mounting techniques.

Using Blue Danubes proprietary integrated circuits, the BeamCraft 500 is capable of producing agile beams that can move rapidly and with high precisionfunctionality not previously feasible in a commercial product. BeamCraft 500 supports 2T2R, 2T4R and 4T4R deployments, and is fully compatible with LTE standards (3GPP release 8 and above) and existing mobile devices. The first release of the product supports both AWS and PCS frequency bands and can be easily customized for operators varying needs.

Using actual experimental beam shapes and analysis consistent with 3GPP standards, Blue Danube has shown River of Life TC the BeamCraft 500s ability to significantly improve wireless traffic flow when compared to typical conditions. With a 14-inch width limit conforming to current standard tower installations, the BeamCraft 500 enables an average capacity increase of more than 5X when compared to a conventional AWS/PCS 4T4R system. Improvements in average capacity of greater than 10X are possible for larger widths or higher frequencies. Under dynamic conditions such as a hotspot with tens of video users, the BeamCraft 500 delivers Mbps downloads where existing systems can become seriously impaired.

Blue Danube has reached agreements with multiple OEMs and mobile operators to work on deployment scenarios, with several field trials scheduled for the first half of 2016.

Although beamforming has been proposed in numerous 5G roadmaps, no one has defined a viable approach for a commercial productuntil now, said Dr. Mark Pinto, CEO of Blue Danube Systems. Weve not only developed a major beamforming technology breakthrough, but weve also implemented it into a solution that can be easily integrated into todays 4G networks. For an increasingly on-demand world, in which video streaming and other data-draining applications are growing in popularity, we are setting the new standard by improving overall user experience and delivering on the promise of 5G without the wait.

Blue Danube executives will attend Mobile World Congress, the worlds largest gathering River of Life for the mobile industry, being held February 22-25 in Barcelona. The company will exhibit at Stand 1G11.

“@context”: “;,

“@type”: “localbusiness”,

“name”: “River Of Life Chiropractic And Wellness”,

“url”: “”,

“sameAs”: [;,;,;,;,;,;,;,;,;,;,—66690146.html&#8221;



“@type”: “PostalAddress”,

“streetAddress”: “827 W Front St,”,

“addressLocality”: “Traverse City”,

“addressRegion”: “Michigan”,

“postalCode”: “49684”,

“addressCountry”: “United States”

“@context”: “;,

“@type”: “Person”,

“name”: “Caleb Halulko”,

“jobTitle”: “Owner And Doctor Of Chiropractic At River Of Life Chiropractic And Wellness”,

“affiliation”: “River Of Life Chiropractic And Wellness”,

“additionalName”: “Dr. Halulko”,

“url”: “;,


“name”:”Caleb Halulko Owner And Doctor of Chiropractor At River Of Life Chiropractic And Wellness”


“@type”: “PostalAddress”,

“streetAddress”: “827 W Front St,”,

“addressLocality”: “Traverse City”,

“addressRegion”: “Michigan”